.svg){kind=small}
Mount antennas at an elevated position for better signal transmission.
Ensure a clear line of sight between the units to avoid interference.
Avoid placing devices near metal structures or high-interference areas.
.
FAQs
5km point to point installation instructions
Wall Mounting
- Secure the mounting bracket on the wall.
- Install the device to the mounting bracket.
Pole Mounting
- Secure the mounting bracket to the pole by threading a clamp through the mounting bracket.
- Install the device to the mounting bracket.
Connecting Cables
Plug one end of the cable into the PoE port of the PoE adapter and plug the other end into the LAN1/PoE port of the device. Connect the LAN port of the PoE adapter to the server or camera. Plug the PoE adapter into 220 V power socket.
Or you can connect the DC port of the device to the 12 VDC adapter, and connect the LAN port of the device to the server or camera.
Warning
Remember to install the bottom cover for waterproof and dustproof purposes.
Verifying Installation
(1) Checking the Device
Verify if the external power supply matches the specification.
Verify that the device has been fastened and will not move or tilt.
(2) Checking the Power Supply
Make sure all power cables are properly connected.
Make sure the device is operational after power-on.
Verifying Operating Status
Setting up Configuration Environment
Make sure all power cables are properly connected and meet the safety requirement.
Checking Environment before/after Power-on
(1) Before power-on, check the following items:
Verify that the power supply is properly connected.
Verify that the input voltage matches the specification.
(2) After power-on, check the following item (Recommended):
Check the indicator status.
Monitoring and Maintenance
Monitoring
When the bridge is running, you can monitor the device status by observing the indicator.
Maintenance
If a hardware error occurs, please contact customer support for help.
.svg)
